Yes the Lippert Replacement Motor Harness for RV In-Wall Slide-Out # LC229755 will work just fine as this replacement harness will work with all Lippert In-Wall slide outs.
This harness measures 20' long, however if you wanted a different length you could also use # LC238991 for a 25' long harness, # LC247768 for a 15' long harness, # LC229756 for a 30' long harness, and # LC86VR for a 10' long harness. view full answer...
I believe what you are looking for is the Kwikee SuperSlide II Tray Assembly Kit for RV Cargo Compartment # LC370762. This is 90" deep so that matches but the smallest trim piece we carry width-wise is part # LC370676 which is 24" so this is a little wider than what you are needing.
If that won't work then you might be able to utilize some under-storage compartments instead. The closest that we have to the 90" length is part # LC175180 which is 96" long. The slide-out bins that come with... view full answer...
Typically you want your slide out topper awning to overhang each side, so I recommend that you use the Solera RV Slide-Out Awning - 5'1" Wide - 48" Projection - Black # LCV000168104. This topper fits RVs/Trailers with slide-outs 57" - 61" wide and up to 48" long. I've linked a quick review video of this part for you to have a look at, as well. view full answer...
When it comes to choosing the correct slide out awnings for your 2022 Salem Hemisphere 356 QB we have some options for you. For the main slide-out I would recommend The Solera RV Slide-Out Awning - 13 foot 1 inch Wide - 48 inch Projection - White # LCV000163300 or the black awning # LCV000168109. They will fit anywhere between 152 inches wide to 157 inches wide. They have a simple installation with included brackets, hardware, and awning rail. The material is constructed with heat-welded... view full answer...
For your slide out where the flanges are 97" and the box is 91" I recommend using the Solera RV Slide-Out Awning Black # LCV000168108 or part # LCV000163290 for white; these are 8'-7" (103") wide slide out toppers. This size is going to stick out 3" past each side of the flange and would be the correct size for your application.
I've linked some review videos of these parts. view full answer...
For a 93" wide slide out the appropriate parts you're looking for are either the Solera RV Slide-Out Awning - 8'1" Wide - 48" Projection # LCV000168107 (black) or # LCV000163289 (white)-these are the ones with a 97" wide awning rail. These awnings will have a bit of overhang on each side to provide plenty of protection from water and debris accumulating on the top of your slide out.
I've linked a review video of this part for you to check out. view full answer...
To start with the seals for your slide out, it sounds like you've got a bulb seal like the Rubber Bulb Seal for RV Slide Out - 1" C-Channel - 15' Long x 7/8" Tall # SR74FR, which is available in a variety of lengths. I've linked our entire selection of bulb seals for you to check out and choose how long you need.
For the slide out awning to cover your 100-1/2" long slide out you'll want to use either the Solera RV Slide-Out Awning - 8'7" Wide - 48" Projection - White # LCV000163290 or... view full answer...
The Solera RV Slide-Out Awning # LCV000168112 will fit your RV's slide out that measures 167" including the flange, and 37" long. This awning will fit slide outs that are 164-169" wide and up to 48" long.
However, you will need at least 7" of clearance on either side of your box so if you do not have that then you will have to order the next size down which would be the Solera RV Slide-Out Awning # LCV000168110. view full answer...
We have two options for you. The Solera RV Slide-Out Awning - 8'7" Wide - 48" Projection - Black, part # LCV000168108, will fit slide-outs that measure 98" to 103" in width. It also comes in white, part # LCV000163290.
I have included product description links and a video review link below. view full answer...
For a slide out that measures 147" from outside flange to outside flange you'll want to use the Solera RV Slide-Out Awning - 12'7" Wide - 48" Projection - Black # LCV000165061 you were looking at or the white version with part # LCV000163299. This particular slide-out awning is designed for slide-outs between 146"-151", so yours is perfectly sized for this. view full answer...
Sure thing, for your 7'2" slide out, you'll want the Solera RV Slide-Out Awning - 7'7" Wide - 48" Projection # LCV000168106, for your 12'3/4" slide out, you'll want the Solera RV Slide-Out Awning # LCV000177334, and for your 13'1/2" slide out you'll want the Solera RV Slide-Out Awning # LCV000168109.
All of these awnings are black in color with matching black hardware, and are American made. view full answer...
We've got exactly what you're looking for. For the 79" slide out you'll want to use the Solera RV Slide-Out Awning - 6'7" Wide - 48" Projection - Black # LCV000168105.
For the 142" wide slide out you'll want to use the Solera RV Slide-Out Awning - 12'1" Wide - 48" Projection - Black # LCV000177334.
For the 152" slide out you'll want to use the Solera RV Slide-Out Awning - 13'1" Wide - 48" Projection - Black # LCV000168109. view full answer...
Assuming that the 11.5 foot dimension you mentioned is the outside width from flange to flange, the widest part of the slide-out, you'll need # LCV000139496 for a white awning or # LCV000168328 for black. The awnings are designed for slide-outs measuing 134-139 inches wide, at their widest point.
I'll link to a demonstration video and a video showing a typical install. view full answer...
For your Grand Design 382WB, we have the following:
For your 3 81" slide outs, we have the Solera RV Slide-Out Awning # LCV000165062, which is black in color and is a Solera awning.
For your 1 88" slide-out, we have the Solera RV Slide-Out Awning # LCV000163288, which we only have in white, but is a Solera awning.
Lastly, for your 103.5" slide-out, we have the Solera RV Slide-Out Awning # LCV000168325, which is black in color, and is a Solera Awning.
These kits come with all the necessary... view full answer...
I recommend the Solera RV Slide-Out Awning - 13'1" Wide - 48" Projection # LCV000168109 which will fit RV's with slide outs that are 152" to 157" wide and up to 48" long, the awning rail is included.
This is also available in white # LCV000163300 if you prefer white.
If you don't have at least 7" of clearance on either side of your slide out box you'll need to order the size down which is the Solera RV Slide-Out Awning - 12'7" Wide - 48" Projection # LCV000163299.
All three kits come... view full answer...
Typically you want your slide out topper to extend a minimum of 2-1/2" outside each flange. So, for a 4'-8" wide slide out you'll want to use the Solera Slide Topper- 5' Wide- 48" Projection # LC23FR, which is only available in black. Then for the 9'-3" wide slide out, you'll want to use the Solera RV Slide-Out Awning - 9'7" Wide - 48" Projection - Black # LCV000251461
These would be the correct size slide out awnings for the slide outs that you've mentioned based off of the measurements... view full answer...
I can certainly help you locate the correct slide-out awnings for your coach. On the 59-1/2" wide slide out you'll want to use the Solera RV Slide-Out Awning - 5'1" Wide - 48" Projection - Black # LCV000168104 and then for the 13'-1" slide out you'll want to use the Solera RV Slide-Out Awning - 13'1" Wide - 48" Projection - Black # LCV000168109. view full answer...
We have exactly what you need!
For your 82" slide-out you can use the:
- Solera RV Slide-Out Awning # LCV000165062.
And
For your 151" slide out, you can use the:
- Solera RV Slide-Out Awning # LCV000165061.
Both of these toppers are black in color, and the fabric is made with 13.5-oz vinyl, and won't crack in cold temperatures. view full answer...
We have what you need.
Lippert RV Slide-Out Motor by Klauber # LC130057.
This will be the replacement for the Klauber 500 series motors. view full answer...
For your 2021 Chaparral 334FL you will want the Solera RV Slide-Out Awning # LCV000165062 for your 85" slide outs, and Solera RV Slide-Out Awning # LCV000168105 for your 76" slide outs.
Please note that if you do not have at least 7" of clearance on either side of your slide out box, you'll need the next size down. view full answer...
Go To Results